If you need Spray Foam Removal Near Me in Grimsby, we strip failed spray foam insulation out of lofts, rafters and cavity walls without wrecking the roof structure underneath. We cover Grimsby, Cleethorpes, Immingham and the villages across North East Lincolnshire. Most lofts are cleared in a single day, with a free survey and a fixed quote before we start. We have been doing this since 2022, so we know exactly what surveyors and lenders want to see.
Spray Foam Removal Near Me in Grimsby is the controlled stripping of cured polyurethane foam from roof timbers, rafters and wall cavities, followed by cleaning, ventilation checks and reinstatement of the roof build-up. We cut the foam back with a spray foam cutting saw and oscillating multi-tool, then remove the residue with dry ice blasting or sand blasting equipment depending on how hard the foam has cured. Closed cell foam comes off in dense slabs; open cell foam is softer and dustier, so it gets bagged and extracted through an industrial vacuum and air scrubber.
Most of our Grimsby work starts with the same problem: a mortgage lender or building surveyor has flagged the foam and the sale has stalled. Foam sprayed directly onto the underside of timber roof tiles traps moisture, kills airflow and starts roof rot within a few winters. If you have been searching for local spray foam extraction in Grimsby, we can usually survey within 48 hours and give you a written scope the same week. We also handle cavity wall foam and loft insulation boards that have slumped or gone damp.
One fixed price covers the survey, the removal, the waste disposal and the documentation. If extra foam is found once we start cutting, we stop and re-quote before continuing so you are never billed for work you did not approve.
A technician attends, inspects the loft or cavity with a boroscope camera, takes moisture readings from the timbers and photographs everything. You get a written scope and a fixed price the same day, with no charge and no obligation to book.
We cut, blast or thermally soften the foam depending on type and how hard it has cured. The work area is sheeted, an air scrubber runs throughout and an industrial vacuum collects dust at the cutting point. Most lofts are cleared in four to six hours.
All foam is bagged, sealed and removed from site the same day through licensed waste routes. Nothing is left in your garden, driveway or skip. You get a waste transfer note with the rest of the paperwork for your records.
With the foam off we inspect every rafter and batten, clear the eaves vents and confirm the breathable membrane is intact. Any soft timber is photographed and flagged so you can decide on repairs before reinstating insulation.
You receive before-and-after photographs, moisture readings, the method statement and a removal certificate. This is the pack your mortgage lender, valuer, solicitor or insurer asks for, and it is usually issued within 24 hours of completion.
Where new insulation is needed we recommend breathable options such as Thermafleece, Rockwool or Knauf mineral wool, sized to current building regulations. We can quote for reinstatement separately so you can decide what suits your budget.
We attend your property, usually within 48 hours, and inspect the loft, rafters and any cavity wall foam. A boroscope camera goes into the void and a moisture meter checks timber readings. You get photographs, a written scope and a fixed price the same day. No charge, no obligation.
Before we cut anything we agree the removal method with you in writing: dry ice blasting for brittle foam, sand blasting for stubborn closed cell, or mechanical cutting for thick slabs. We confirm access, dust control and how waste leaves the property. This is the document your lender may ask to see.
Two technicians in protective clothing and respirators sheet up the loft, run an air scrubber and start cutting. A typical three-bedroom semi in Grimsby takes four to six hours. Foam is bagged, sealed and removed from site the same day, not left in your garden.
With the foam gone we inspect every rafter, batten and felt run. Any soft timber is flagged and photographed. We check the breathable membrane, clear the eaves vents and confirm the roof void is dry. You see the timbers yourself before we pack up.
You receive a removal report with before-and-after photographs, moisture readings and a statement of the method used. Where insulation is needed, we reinstate with mineral wool or Thermafleece rather than foam. That report is what your valuer, solicitor or insurer wants on file.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Lifts brittle or partially cured foam from rafters without water, chemicals or abrasive damage. The cleanest option for lofts with delicate felt or breathable membrane.
Removes stubborn closed cell residue bonded hard to brick, stone or timber after mechanical cutting. Dust is contained with sheeting and an air scrubber throughout.
Cuts thick closed cell slabs back to the timber face quickly and accurately, reducing the risk of gouging rafters or battens during removal.
Gets into rafter bays, eaves and awkward corners where a saw will not fit. Used to trim foam tight to timbers before blasting or extraction.
Collects foam dust at the cutting point and filters the loft air continuously, keeping dust out of your living space during the job.
Inspects the roof void and takes timber moisture readings before and after removal, giving you documented evidence the timbers are sound.
Every technician wears full PPE during removal. Foam dust and old insulation fibres are not something you want in your lungs or on your skin.
A three-bedroom semi in Scartho had closed cell foam sprayed between every rafter. The buyer's lender refused the mortgage and the sale had already fallen through once. Timbers were damp but still sound, with moisture readings of 22% on the worst rafters.
We stripped the foam in a single day using a cutting saw and dry ice blasting, cleared the eaves vents and re-tested. Moisture readings dropped to 14% within three weeks. The removal report went to the lender, and the sale completed on the second attempt.
A landlord had foam in the lofts of two Victorian terraces in East Marsh. A survey had flagged possible timber damp and the insurer had placed a restriction on the policy. Foam was bonded hard to old bitumen felt and dust was a major concern because both flats were tenanted.
We sealed the loft hatches, ran air scrubbers and removed the foam with dry ice blasting over two days. Timbers were confirmed sound with moisture readings under 16%. Both properties passed the follow-up survey and the insurance restriction was lifted.
A developer bought a bungalow in Cleethorpes with foam sprayed across the entire roof underside. The plan was a full refurbishment, but no trades could start until the foam was gone and the timbers were signed off. Foam was thick, closed cell and bonded to the rafters.
We cut the bulk away with a spray foam cutting saw, sand blasted the residue and left the roof void clean and dry. Moisture readings were taken before and after and included in the report. The refurbishment started on schedule the following week.
Foam that was sold as an insulation upgrade often becomes the reason a sale, remortgage or insurance claim stalls. These are the issues we deal with every week across North East Lincolnshire.
Ask a pro →We remove the foam, document the clean timbers with photographs and moisture readings, and issue a removal certificate. Most Grimsby cases are back with the lender within 10 working days of the survey, and the sale proceeds.
A boroscope camera and moisture meter survey tells you within 30 minutes whether the timbers are sound. We strip the foam, clear the vents and confirm the roof can breathe again before any decay becomes structural.
Once the foam is out we clear blocked eaves vents, check the breathable membrane and confirm airflow through the void. Condensation on the underside of tiles usually stops within days of the roof being able to dry out.
We provide a full removal report with before-and-after photographs and moisture readings that insurers accept as evidence the risk has been dealt with. You can then reinstate cover on a property with a documented, clean roof void.
Call us on 0147 246 0146 or book a free survey online and we will attend within 48 hours across Grimsby and North East Lincolnshire. We inspect the loft, check timber moisture with a meter and give you a fixed written price the same day. If you are comparing firms, ask each one for a method statement and a sample removal report, because that paperwork is what your lender will want.
The right firm is the one that surveys before quoting, uses dust-controlled extraction and hands over a documented removal report. We have worked across Grimsby since 2022, hold CHAS accreditation, Constructionline and SafeContractor registration, and work to BPCA certification standards. Ask any contractor for photographs of previous jobs and a sample report before you book.
Yes. We hold same-day slots for urgent cases, typically where a mortgage completion or exchange date is close. Call before 10am and we can usually survey the same afternoon, with removal booked within 48 hours. A standard three-bedroom loft takes four to six hours on site, and we remove all waste the same day.
We are based in Grimsby and cover the whole of North East Lincolnshire, including Cleethorpes, Humberston, Immingham, Waltham and the surrounding villages. We handle loft, attic, roof, cavity wall and warehouse foam removal. If you are outside our patch we will tell you straight away and point you to someone closer rather than waste your time.
Same Day Spray Foam RemovalFor Grimsby sellers facing a completion deadline, we hold same-day survey slots and can often remove foam within 48 hours of the first call. Ideal when a valuer has flagged foam and the buyer's lender needs evidence fast.Explore →
24/7 Spray Foam RemovalEmergency call-outs for water ingress through foam-covered roofs, storm damage or insurance deadlines. We answer the phone around the clock for Grimsby and North East Lincolnshire and can make safe the same night before full removal the next morning.Explore →
Residential Spray Foam RemovalThe core of what we do across Grimsby: lofts, rafters, cavity walls and dormer cheeks in houses and bungalows. We protect carpets and furnishings, control dust and hand over a report your mortgage lender will accept.Explore →
Commercial Spray Foam RemovalWarehouses, workshops and agricultural buildings in and around Immingham and Stallingborough. We work to CHAS and SafeContractor standards, provide method statements and RAMS, and can work out of hours to keep your operation running.Explore →
Loft Spray Foam RemovalThe most common job we handle in Grimsby. Foam sprayed between rafters traps condensation and rots timber. We cut it out, inspect the rafters, clear the eaves vents and reinstate with mineral wool where insulation is needed.Explore →
Roof Spray Foam RemovalWhere foam has been sprayed directly to the underside of tiles or felt, we remove it carefully to avoid damaging the roof covering. A boroscope camera checks the void before and after, and we confirm the roof can breathe again.Explore →
Attic Spray Foam RemovalAttics in older Grimsby terraces often have foam over old bitumen felt. We remove the foam, assess the felt condition and advise whether a breathable membrane is needed before any new insulation goes in.Explore →
Spray Foam Insulation RemovalFull removal of failed spray foam insulation from roofs, walls and floors, including open cell and closed cell types. We bag and remove all waste the same day and document the job for your records.Explore →Free survey, fixed price, documented removal your lender will accept. Call 0147 246 0146 and we will book you in, usually within 48 hours. If your completion date is tight, tell us on the phone and we will do everything we can to fit you in sooner.
Book Free Survey 0147 246 0146 →Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email [email protected] with a photo of your loft and we will give you an initial view before we visit.