24/7 Spray Foam Removal in Grimsby means we answer the phone at 3am and we're on your roof by first light. Whether a surveyor has flagged spray foam insulation and your mortgage lender has stalled, or you've found damp and condensation spreading through your loft, our team cuts out open cell and closed cell foam, clears the timbers and leaves the roof space ready to breathe again.
24/7 Spray Foam Removal in Grimsby is the round-the-clock extraction of spray foam insulation from lofts, roofs, cavity walls and commercial buildings, carried out by trained operatives using dry ice blasting machines, spray foam cutting saws, oscillating multi-tools and industrial vacuums. We remove polyurethane foam from rafters, trusses and roof tiles without damaging the timber beneath, then run a boroscope camera and moisture meter across the structure to confirm the deck is sound. Every job ends with an air scrubber pass and a written clearance note you can hand to a surveyor or lender.
Grimsby's coastal position means driving rain off the Humber and cold North Sea air hit roofs hard. When spray foam is applied directly to the underside of timber roof tiles, it traps moisture, blocks ventilation and accelerates roof rot. We see it constantly in older terraces around East Marsh and West Marsh, and in 1930s semis across Scartho and Nunsthorpe. If you need 24 hour spray foam removal Grimsby homeowners can rely on, our night shift covers emergency call-outs so a failed building survey doesn't cost you a house sale.
Every 24/7 Spray Foam Removal in Grimsby job includes the survey, containment, extraction, clean-down and clearance paperwork as standard. There are no hidden extras for waste disposal or documentation. If your loft needs new insulation after the foam comes out, we quote that separately so you can see exactly what you're paying for.
A surveyor attends with a boroscope camera and moisture meter, maps the foam coverage and photographs any timber decay. You get a fixed written quote the same day. No charge, no obligation, across all Grimsby and North East Lincolnshire postcodes.
We sheet up the loft, seal the hatch and run an air scrubber throughout the job. Dust and foam fragments stay in the work area, not in your bedrooms. On commercial jobs we build the same containment around plant and stock.
Dry ice blasting, cutting saws and oscillating multi-tools remove open cell and closed cell foam from rafters, trusses and tiles. Industrial vacuums then clear every fragment from the loft floor, eaves and cavity before we check airflow.
We re-run the moisture meter across the timbers and inspect rafters for rot. If readings are still elevated we tell you what needs to dry and how long it will take, rather than reinstating insulation over damp wood that will cause problems later.
You receive before-and-after photos, moisture readings and a written clearance note suitable for lenders, surveyors and solicitors. Most Grimsby sales we unblock complete within 10 working days of the extraction being signed off.
All extracted foam is bagged, labelled and removed through licensed waste routes. We separate materials for recycling where possible and provide a waste transfer note on request, which some commercial clients need for their own compliance records.
You call 0147 246 0146 and speak to a real person, any hour. We ask what's been foamed, when it was installed and whether a surveyor or lender is involved. Within 20 minutes we've booked a site visit, usually same day across Grimsby and Cleethorpes.
A surveyor attends with a boroscope camera and moisture meter. We map the foam coverage, check rafter condition and photograph any timber decay. You get a fixed written quote the same day, itemised by area, with no charge for the survey itself.
On the day, we sheet up the loft, set an air scrubber running and start cutting. Dry ice blasting lifts foam off rafters where the bond is light; a spray foam cutting saw handles the thicker closed cell sections. A two-man crew clears a standard loft in 4-6 hours.
Industrial vacuums pull every fragment out of the loft and cavity. We re-run the moisture meter across the timbers and check airflow at the eaves. If readings are still high we tell you why and what needs to dry before reinstatement, rather than papering over it.
We fit mineral wool or Rockwool between rafters, restore the vapour barrier and hand you a clearance pack: before-and-after photos, moisture readings and a workmanship warranty. Most customers forward it straight to their lender or buyer's solicitor.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Lifts lightly bonded open cell foam off rafters without abrasion or secondary waste. Ideal for older foam that has started to lose its grip and for timbers you want to preserve.
Cuts through dense closed cell foam bonded hard to rafters. Controlled depth settings let us remove foam without nicking the timber or the breathable membrane beneath.
Reaches into corners, eaves and around truss joints where a full saw won't fit. Used for detail work and for freeing foam around cables and pipework without cutting them.
Captures foam fragments and airborne dust during extraction. The scrubber runs throughout the job so nothing migrates into the rest of your home or your stock area.
Inspects behind foam and measures timber moisture before and after extraction. These readings form the basis of the clearance documentation your lender or surveyor needs.
Every operative wears fitted respirators, coveralls and eye protection. Spray foam dust is unpleasant and some older foams carry chemical risk, so we don't cut corners on PPE.
A 1930s semi in Scartho had closed cell foam sprayed across every rafter. The buyer's survey flagged it, the lender withdrew the mortgage and the sale stalled with the chain threatening to collapse.
We removed 52 square metres of foam over two days, dried the timbers and issued a clearance note with before-and-after photos. The lender accepted it, and the sale completed 11 days after our first visit.
A Victorian terrace in East Marsh had foam blocking every eaves vent. Condensation was running down the inside of the roof tiles and damp patches were appearing on the back bedroom ceiling.
Foam was removed in a single day, moisture readings dropped from 28% to 14% over the following week, and the ceiling dried out without any replastering. The tenant reported no further damp that winter.
A coastal property in Cleethorpes had foam on the rafters and corroded fixings from years of salt air. A storm pushed water through and the owner needed emergency extraction before the damage spread.
Our night crew contained the leak and removed the saturated foam from the affected section. The full roof was cleared the next day, fixings were replaced and the deck passed a moisture check at 15%.
Spray foam causes a specific set of problems in Grimsby homes, and they get worse the longer you leave them. Here's what we fix, and what happens if you don't.
Ask a pro →We remove the foam, document the extraction with photos and moisture readings, and issue a clearance note most high-street lenders accept. Most Grimsby sales we unblock complete within 10 working days of extraction.
Our survey uses a boroscope camera to inspect behind the foam before we quote. We cut foam away, treat any early decay and dry the timbers, then confirm with a moisture meter that the structure is sound before reinstating insulation.
We remove the foam, clear the eaves vents and restore airflow through the roof space. A breathable membrane and correctly fitted mineral wool or Thermafleece keep the loft warm without sealing moisture in.
We remove the foam and reinstate compliant insulation to current U-values, then provide documentation showing the roof space meets ventilation and insulation standards. Most insurers accept our clearance pack without further questions.
Yes. Our phone line is staffed 24 hours a day, every day, including weekends and bank holidays. Call 0147 246 0146 at any hour and you'll speak to someone who can book a survey or dispatch an emergency crew. Most night-time calls in Grimsby, Cleethorpes and Humberston are surveyed by 9am the same morning.
You can. If water is tracking through foamed rafters or a sale is about to collapse, we run a night shift across North East Lincolnshire. Emergency 24/7 spray foam removal Grimsby and Cleethorpes call-outs are typically on site within 4-6 hours. We contain the leak, make the roof safe and return in daylight to complete the extraction.
If you're in Grimsby, Cleethorpes, Humberston, Waltham, Immingham or anywhere across North East Lincolnshire, yes. We cover the whole area from our Grimsby base, so a 24 hour spray foam extraction in Cleethorpes North East Lincolnshire is a standard call-out for us, not a special trip. Travel within 15 miles is included in the quote.
Typical 2026 pricing for a standard loft runs £1,200-£2,400, with emergency or out-of-hours call-outs adding £150-£350 depending on timing. Larger roofs, closed cell foam or cavity wall extraction push costs higher. You get a fixed written quote after the survey, and the survey itself is free across Grimsby and North East Lincolnshire.
Spray Foam Removal Near MeIf you're searching for spray foam removal near me in Grimsby, this is the same service under a different name. We cover the whole of North East Lincolnshire and can usually survey within 24 hours of your call, day or night.Explore →
Same Day Spray Foam RemovalWhen a surveyor or lender needs foam gone fast, our same-day service pairs with 24/7 Spray Foam Removal in Grimsby. Call before 10am and we can often have a crew on site the same afternoon, with clearance paperwork issued within 48 hours.Explore →
Residential Spray Foam RemovalMost of our 24/7 Spray Foam Removal in Grimsby work is domestic: lofts, rafters and cavity walls in semis, terraces and bungalows. We handle the containment, extraction and reinstatement so your home is mortgage-ready and your insurance stays valid.Explore →
Commercial Spray Foam RemovalWe apply the same 24/7 response to shops, offices and industrial units across Grimsby and Immingham. Out-of-hours extraction keeps your business trading, and our CHAS and SafeContractor accreditation satisfies most commercial site induction requirements.Explore →
Loft Spray Foam RemovalLofts are where spray foam causes the most damage in Grimsby. Our 24/7 Spray Foam Removal in Grimsby team cuts foam off rafters, clears the deck and restores ventilation so condensation stops forming on your roof tiles and timbers can dry out.Explore →
Roof Spray Foam RemovalFoam sprayed directly onto roof tiles traps water and accelerates roof rot. We remove it carefully with dry ice blasting and cutting saws, preserving the tiles and breathable membrane, then confirm the deck is sound with a moisture meter before sign-off.Explore →
Attic Spray Foam RemovalAttic foam removal follows the same 24/7 pattern as our loft work. We contain the space, extract open cell and closed cell foam, vacuum every fragment and leave the attic ready for new insulation boards or mineral wool to be fitted.Explore →
Spray Foam Insulation RemovalThis is the umbrella service behind 24/7 Spray Foam Removal in Grimsby. It covers polyurethane foam of any age or thickness, including the older urea-formaldehyde foams found in some 1970s Grimsby properties, and includes safe disposal.Explore →One call and we'll book a free survey, usually the same day. Our operatives are insured, accredited and trained to leave your loft mortgage-ready. Call 0147 246 0146 now, any hour, and we'll take it from there.
Call Now 0147 246 0146 →Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email [email protected] with a photo of your loft and we will give you an initial view before we visit.