Attic Spray Foam Removal in Grimsby is the job we do most weeks, and it is rarely as simple as pulling foam out of a loft. We cut, scrape and vacuum every trace of spray foam insulation from your roof timbers, then check the rafters for rot and damp before we leave. If a surveyor, lender or buyer has flagged your loft, we can usually get eyes on it within 48 hours.
Attic Spray Foam Removal in Grimsby means stripping cured polyurethane foam from the underside of your roof deck and rafters without wrecking the timbers underneath. We cut the foam into manageable sections with a spray foam cutting saw, then work it free with an oscillating multi-tool before vacuuming the dust and debris into an industrial vacuum. Closed cell foam is denser and slower to remove than open cell foam, so we assess which type you have before quoting. A boroscope camera and moisture meter tell us whether the foam has trapped damp against the timber.
Most lofts we open in Grimsby have the same story: foam sprayed directly onto the felt or breathable membrane, no air gap, and condensation running down the rafters within a couple of winters. That is why loft spray foam removal North East Lincolnshire homeowners search for is usually driven by a failed building survey or a mortgage refusal rather than a comfort problem. If you need attic spray foam removal near me in Grimsby, we start with a free loft inspection and tell you honestly whether the foam has to come out or can stay.
Every job is quoted as a complete package, so you know what you are paying for before we start. The list below covers a standard Grimsby loft clearance. If your loft needs extra work, such as timber treatment or re-insulation, we price that separately and agree it with you first.
We inspect the loft, identify the foam type and check the timbers with a moisture meter and boroscope camera. You get a fixed written price the same day, plus photos of anything that concerns us. Surveys take 30 to 45 minutes and there is no charge.
We cut, scrape and vacuum every trace of spray foam from rafters, purlins and the roof deck. Foam is bagged on site and removed. We use a spray foam cutting saw and oscillating multi-tool for the bulk, with dry ice blasting for stubborn residue.
With the foam gone, we check every rafter for rot, timber decay and hidden structural damage. You get a written report with before and after photos and moisture readings, which is the document lenders and surveyors ask to see.
We seal the loft hatch, run an air scrubber throughout and sheet floors and stairwells before we start. Technicians wear full respirators and protective clothing. When we finish, the loft is vacuumed with an industrial vacuum and all waste is taken away.
Spray foam blocks airflow between the insulation and the roof felt. Once it is out, we check that air can move through the loft again and advise on any vents or breathable membrane work needed to keep the roof dry.
We inspect the loft, identify whether you have open cell or closed cell foam, and check the timbers with a moisture meter and boroscope camera. You get a fixed price the same day, plus photos of anything that concerns us. Surveys take 30 to 45 minutes and there is no charge.
On the day, we lay protective sheeting, seal the loft hatch and set up an air scrubber so dust stays in the work area. Our technicians wear full respirators and protective clothing. If there is any chance of asbestos in older board or pipe lagging, we stop and arrange an asbestos awareness check before cutting anything.
We cut the foam with a spray foam cutting saw, work it free with an oscillating multi-tool and lift it into bags. A dry ice blasting machine or sand blasting equipment handles stubborn residue on awkward rafters. A typical three-bed semi takes one to two days; larger or heavily foamed lofts can run to three.
With the foam gone, we check every rafter and purlin for rot, timber decay and hidden structural damage. Any soft timber is photographed and reported. We treat minor surface mould and leave the loft to dry with ventilation restored, usually 24 to 48 hours before any new insulation goes in.
We vacuum the loft with an industrial vacuum, remove all waste, and hand you a written report with before and after photos plus moisture readings. That report is what lenders and surveyors ask for. Most jobs are cleared and documented within two working days of starting.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Cuts cured foam into manageable sections so it can be lifted out without tearing the timber underneath. It is the first tool on every job and does most of the heavy work.
Works foam free from awkward corners, around rafters and behind purlins where a saw cannot reach. It lets us remove foam cleanly without gouging the timber.
Collects foam dust, offcuts and debris as we work. It keeps the loft clean and stops fine particles drifting down into the living space through the hatch.
Runs throughout the job to filter airborne dust inside the containment area. It is why we can work in an occupied house without dust settling on your furniture.
Lets us see behind foam, under felt and inside closed cavities before we cut. It is how we check for hidden rot and damp without opening up the whole roof.
Reads the moisture content of rafters and purlins before and after removal. Those readings go into your written report as evidence for lenders and surveyors.
Removes stubborn foam residue from rough timber and awkward corners without abrasives. We use it as a finishing method on the last traces of foam.
A three-bed semi in Scartho had closed cell foam sprayed across the entire roof deck. The buyer's lender refused the mortgage and the surveyor flagged hidden rot risk. The sale had already stalled once and the chain was close to collapsing.
We stripped the foam over two days, found two rafters with early rot and treated them. The written report with photos and moisture readings went to the lender within a week. The mortgage was reinstated and the sale completed four weeks later.
A Victorian terrace in East Marsh had open cell foam sprayed directly onto old felt. Condensation ran down the rafters every winter and the loft smelled damp. The owner had been told the whole roof might need replacing.
We removed the foam in a single day, treated surface mould and restored ventilation through the loft. Moisture readings dropped from 28 percent to 14 percent within 48 hours. No roof replacement was needed.
A landlord's rental property in Immingham had spray foam in the loft that had never been disclosed to the insurer. After a storm claim, the insurer raised questions about the roof structure and threatened to void the policy.
We cleared the foam, inspected the timbers and issued a documented report for the insurer. The roof structure was sound, the policy was maintained, and the landlord re-insulated with mineral wool to current standards.
Most people call us because something has gone wrong: a lender has said no, a surveyor has flagged the roof, or damp has started to show. Here are the problems we deal with most often in Grimsby lofts.
Ask a pro →We strip the foam, inspect the timbers and issue a written clearance report with photos and moisture readings. Most lenders accept that report and reinstate the offer. Typical turnaround from survey to report is five to seven working days.
We remove the foam, dry the loft with restored ventilation and treat any surface mould. A moisture meter reading before and after shows you the difference. If rot has started, we flag the affected rafters and can recommend a joiner.
We provide the evidence a buyer and their lender need: photos of every rafter once the foam is out, moisture readings, and a written statement that the roof structure has been inspected. That usually gets the sale back on track within a few weeks.
We remove the foam, document the condition of the roof structure and give you a report you can send to your insurer. If the roof covering needs repair, we tell you before we re-insulate, so the policy is based on a known, inspected roof.
Most Grimsby lofts cost between 1,800 and 4,500 pounds to clear in 2026, depending on loft size, foam type and access. A standard three-bed semi with open cell foam usually lands around 2,200 to 2,800 pounds. Closed cell foam is denser and slower to cut, so it sits at the top of the range. The price includes waste removal and your written clearance report.
Yes. We remove open cell and closed cell spray foam from lofts across Grimsby, Cleethorpes, Immingham and the surrounding villages. We use a spray foam cutting saw, oscillating multi-tool and industrial vacuum, with dry ice blasting for stubborn residue on rafters. Most lofts are cleared in one to three days, and we document the timbers for your lender or surveyor.
It usually rescues it. Lenders refuse mortgages when spray foam is bonded to the roof deck because it hides rot and blocks ventilation. Once the foam is out and the timbers are inspected, we give you a written report with photos and moisture readings. Most Grimsby buyers we help get their offer reinstated within four to six weeks of clearance.
A typical three-bed semi takes one to two working days for extraction, plus 24 to 48 hours of drying before any new insulation goes back in. Larger detached lofts or heavy closed cell foam can run to three days. We give you a firm timeframe at survey, and same-day starts are often possible if you are working to a mortgage deadline.
Spray Foam Removal Near MeIf you are searching for spray foam removal close to home, we cover every Grimsby postcode and most of North East Lincolnshire. The same survey, cutting and vacuuming process applies whether the foam is in a loft, a dormer or a flat roof void.Explore →
Same Day Spray Foam RemovalWhen a surveyor or lender needs the foam gone fast, we can mobilise the same day across Grimsby. We keep a removal crew on standby for urgent clearances, and we prioritise jobs with a mortgage deadline or a re-inspection date already booked.Explore →
24/7 Spray Foam RemovalOur phone line is answered 24/7, so you can book a survey or ask about a problem at any hour. Emergency call-outs are rare with spray foam, but if water is getting in through a failed roof covering, we can get someone out to assess it quickly.Explore →
Residential Spray Foam RemovalMost of our work is residential: semis, terraces and detached homes across Grimsby and Cleethorpes. We work around family routines, seal the loft hatch to keep dust out of living areas, and clear up fully before we leave each day.Explore →
Commercial Spray Foam RemovalWe also strip spray foam from commercial lofts, workshops and light industrial units around Grimsby Docks and Immingham. Commercial jobs are usually larger and need out-of-hours working, which we can arrange to keep your business running during the day.Explore →
Loft Spray Foam RemovalLoft spray foam removal is the core of what we do. We remove foam from the underside of roof decks, rafters and purlins, then restore ventilation so the loft can breathe. This is the service most Grimsby homeowners book after a failed survey.Explore →
Roof Spray Foam RemovalFoam sprayed directly onto roof tiles or felt is the hardest to remove cleanly. We access it from inside the loft where possible, cut it back to the deck, and check the roof covering for damage. Where tiles are affected, we advise on repair before re-insulating.Explore →
Spray Foam Insulation RemovalSpray foam insulation removal covers any application: loft, rafter, dormer or flat roof. We identify whether you have open cell or closed cell foam, then choose the right cutting and blasting method. Both types are fully removed and documented.Explore →We answer the phone 24/7, survey most Grimsby lofts within 48 hours, and give you a fixed price before any work starts. If a lender or surveyor is waiting on paperwork, tell us on the call and we will prioritise your job. Call 0147 246 0146.
Get a fixed quote 0147 246 0146 →Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email [email protected] with a photo of your loft and we will give you an initial view before we visit.