Our insulation removal service in Grimsby, North East Lincolnshire takes out failed spray foam, wet mineral wool and blocked loft insulation so your roof can breathe again. We handle residential lofts, commercial units and mortgage-driven removals across Grimsby and Cleethorpes. If a surveyor has flagged foam, or your loft smells damp, call 0147 246 0146 for a same-day assessment.
Insulation removal service in Grimsby, North East Lincolnshire is the controlled strip-out of spray foam, mineral wool, insulation boards and contaminated loft materials from a building, followed by cleaning, ventilation checks and reinstatement of a breathable membrane or vapour barrier. We cut foam with a spray foam cutting saw and oscillating multi-tool, bag it, and run an industrial vacuum and air scrubber so dust does not travel through the house. Every job starts with a boroscope camera and moisture meter survey so we know exactly what is wet, what is bonded and what has to come out.
Most Grimsby call-outs we take are foam that was sprayed directly onto timber roof tiles or straight over a breathable membrane, which traps moisture and starts roof rot. Others are mortgage-driven: a lender's surveyor sees polyurethane foam in the loft and refuses the loan until it is gone. We also clear wet Rockwool and Knauf mineral wool after a leak. If you have been searching for an insulation removal service near me in Grimsby, we cover the town and the surrounding villages, with written confirmation for your lender once the loft is cleared.
Every job includes survey, removal, cleaning, disposal and paperwork. We agree the scope before we start, so you know exactly what is covered and what would be quoted separately, such as timber repairs or new insulation.
We inspect the loft with a boroscope camera and take moisture meter readings on rafters and battens. You get a clear picture of foam type, damp levels and any hidden damage before a single blade touches the timber.
Foam is cut with a spray foam cutting saw and oscillating multi-tool, then lifted with an industrial vacuum. Closed cell foam bonded to rafters may need dry ice blasting or sand blasting equipment to remove it cleanly.
Dust sheets, sealed loft hatches and air scrubbers keep foam dust and fibres out of your living space. We vacuum the loft on completion and wipe down timbers so the space is left clean and ready for inspection.
All foam and mineral wool is bagged, labelled and removed through licensed waste routes. You receive a waste transfer note as proof of proper disposal, which matters for commercial jobs and lender paperwork.
We clear blocked eaves vents and check the breathable membrane for damage. Where the membrane has failed we can replace it, so the roof can dry out properly and any new insulation performs as it should.
After completion you receive photographs of the cleared loft and written confirmation of removal. This is the evidence mortgage lenders and valuers ask for when foam has caused a loan to be refused.
We attend, inspect the loft with a boroscope camera and moisture meter, and check whether foam is open cell or closed cell. You get a fixed price the same day, usually within 2 hours of the visit, covering removal, bagging and disposal. No charge for the survey.
Before any cutting starts we lay dust sheets, seal the loft hatch and set up negative air pressure with an air scrubber. Technicians wear respirators and protective clothing. This keeps foam dust and fibres out of your living space, which matters most in occupied family homes.
Foam is cut back with a spray foam cutting saw and oscillating multi-tool, then lifted with an industrial vacuum. A typical 3-bed semi loft takes 1 to 2 days. Stubborn closed cell foam bonded to timber may need dry ice blasting or sand blasting equipment to remove without damaging the rafters.
We vacuum the loft, wipe down timbers and inspect every rafter for hidden structural damage, timber decay or damp patches. A moisture meter reading is taken and recorded. If we find rot, we tell you on the spot and quote the repair separately before doing anything else.
We refit or replace the breathable membrane, check eaves ventilation and can fit new Thermafleece or Rockwool insulation if you want the loft brought up to current standards. You get photographs, a waste transfer note and written confirmation for your mortgage lender.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Cuts closed cell and open cell foam back from rafters and battens in clean lines, so we can lift it without gouging the timber underneath.
Gets into corners, around wiring and behind plasterboard where a full saw will not fit. Essential for loft conversions and awkward roof voids.
Lifts foam dust, fibres and small debris from the loft floor and timbers. Used alongside air scrubbers to keep dust out of the house.
Creates negative air pressure in the loft so dust and fibres do not drift into living spaces. Critical on occupied family homes.
Inspects behind membranes, under boards and inside roof voids without stripping anything out. Lets us see hidden damage before we quote.
Takes readings on rafters and battens to confirm damp levels and identify where rot is likely. Readings are recorded before and after removal.
Removes tightly bonded closed cell foam from delicate timbers without abrasion. Used where mechanical cutting risks damaging the wood.
A 3-bed semi in Scartho had closed cell foam sprayed across every rafter and over the breathable membrane. The buyer's surveyor flagged it, the mortgage was refused, and moisture readings on the timbers were high enough to suggest early rot.
We removed the foam over 2 days, vacuumed the loft and cleared the eaves vents. Moisture readings dropped to normal within 3 weeks. The lender received photographs and written confirmation, and the mortgage completed.
A Cleethorpes home had condensation dripping onto loft boards every winter. Foam over the breathable membrane was trapping moisture, and stored items were damp and mouldy. Heating bills had crept up because the loft insulation was soaked.
Foam was cut out over 2 days and ventilation restored. The loft dried out within a month. The customer refitted Rockwool insulation and reported the loft stayed dry through the following winter.
An Immingham warehouse had foam across a large roof void that was blocking ventilation and causing damp patches on stored stock. Work could not stop, and the site needed documented disposal for its insurer.
We cleared the void in 4 phased days using PASMA towers and industrial vacuums. Ventilation was restored, damp patches stopped, and the site received waste transfer notes and photographs for its insurer.
Foam and failed insulation cause more damage the longer they stay in. These are the problems we see most often on Grimsby surveys, and what happens if they are left alone.
Ask a pro →We cut the foam back with a spray foam cutting saw and oscillating multi-tool, vacuum the residue, inspect the timbers and reinstate ventilation so the roof can dry out. Any rot found is photographed and quoted before repair.
As an insulation removal contractor Grimsby lenders recognise, we strip the foam, photograph the cleared rafters and supply written confirmation of removal. That is the evidence your lender and valuer need to reconsider the loan.
We remove foam that is blocking the breathable membrane, clear eaves vents and check airflow. Most customers see condensation stop within a few weeks of normal weather once ventilation is restored.
We survey quickly, quote a fixed price and complete removal to a standard surveyors accept. You get photographs and a waste transfer note to pass to the buyer's solicitor and lender.
Most Grimsby loft removals run £1,200 to £3,500 in 2026, depending on loft size and foam type. A standard 3-bed semi with open cell foam typically sits around £1,500 to £2,200. Closed cell foam bonded to rafters costs more because it takes longer to cut and extract. Commercial roof voids and cavity wall foam are quoted after survey.
Apex Focus Spray Foam covers the whole of North East Lincolnshire from our Grimsby base, including Cleethorpes, Immingham, Waltham, Healing and Keelby. We handle residential lofts, commercial units and mortgage-driven removals. Call 0147 246 0146 and we can usually survey within 24 hours.
Removal usually helps, not hurts. Lenders refuse mortgages when spray foam is bonded to roof timbers because it traps moisture and hides rot. Once the foam is out and ventilation is restored, we provide photographs and written confirmation of removal, which is what your lender and valuer need to proceed.
A typical 3-bed semi loft takes 1 to 2 days for extraction, plus half a day for cleaning and reinstatement. Larger detached lofts or closed cell foam bonded to rafters can run 3 to 4 days. We give you a realistic timeframe at survey, not a best-case guess.
Spray Foam Removal Near MeOur core spray foam removal service covers lofts, roofs and cavity walls across Grimsby. If foam is bonded to timbers or blocking ventilation, we cut it out, bag it and dispose of it properly, then confirm the loft is clear for your surveyor.Explore →
Same Day Spray Foam RemovalWhen a lender or buyer needs foam gone quickly, we can often attend and start removal the same day across Grimsby and Cleethorpes. Call before midday and we will tell you honestly whether a same-day start is possible.Explore →
24/7 Spray Foam RemovalEmergency call-outs for active leaks, storm damage or foam that has become wet and unstable. We cover Grimsby and North East Lincolnshire around the clock, with a technician on the phone to talk you through making the loft safe until we arrive.Explore →
Residential Spray Foam RemovalMost of our work is residential: semis, terraces and detached homes in Scartho, Waltham, Humberston and Grimsby town. We work around families, seal the loft hatch and keep dust out of living spaces while we strip the foam.Explore →
Commercial Spray Foam RemovalWarehouses, workshops and commercial roof voids across Immingham and Grimsby. We work to CHAS and SafeContractor standards, provide risk assessments and method statements, and can phase work around your operating hours.Explore →
Loft Spray Foam RemovalLoft foam is the most common job we take on. We cut foam back from rafters and eaves, clear blocked ventilation, and can refit Thermafleece or Rockwool insulation afterwards so the loft performs properly.Explore →
Roof Spray Foam RemovalFoam sprayed directly onto timber roof tiles traps moisture and causes rot. We remove it carefully, inspect the battens and tiles, and reinstate a breathable membrane so the roof can dry out naturally.Explore →
Attic Spray Foam RemovalAttic and loft conversions with foam between rafters need careful extraction to avoid damaging plasterboard and wiring. We survey first, then remove foam with controlled cutting and vacuum equipment.Explore →Fixed price, same-day survey and lender-ready paperwork. Our insulation removal service in Grimsby, North East Lincolnshire has cleared hundreds of lofts since 2022. Call 0147 246 0146 and we will tell you honestly what needs to come out and what it will cost.
Get A Fixed Quote 0147 246 0146 →Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email [email protected] with a photo of your loft and we will give you an initial view before we visit.