Dry Ice Blasting Spray Foam Removal in Grimsby is the cleanest way to strip failed or non-compliant foam from lofts, roofs and cavity walls. We use dry ice blasting spray foam extraction Grimsby homeowners and lenders trust, lifting foam without gouging timber or plasterboard. If a surveyor has flagged spray foam, or you are buying or selling a property, call Apex Focus Spray Foam on 0147 246 0146 for a same-day assessment.
Dry Ice Blasting Spray Foam Removal in Grimsby uses compressed dry ice pellets fired at supersonic speed to shatter and lift spray foam insulation off timber, roof tiles and masonry. The pellets hit at around -78.5C, freeze the polyurethane foam, and it cracks away from the substrate without heat, water or harsh chemicals. We then vacuum the debris with an industrial vacuum and capture airborne dust with an air scrubber. Unlike sand blasting equipment, dry ice leaves no grit behind and will not abrade your roof timbers.
Grimsby's housing stock makes this service essential. Thousands of lofts and roof spaces across North East Lincolnshire were foam-insulated between 2005 and 2015, often with closed cell foam sprayed directly onto breathable membrane and timber roof tiles. That traps moisture, causes roof rot and timber decay, and triggers mortgage refusal when a surveyor spots it. If you need dry ice blasting foam removal near me Grimsby, our team covers Grimsby Town Centre, Scartho, Cleethorpes and Immingham with same-week bookings.
Every job includes the survey, blasting, vacuuming, waste removal and a written completion report. We do not sub-contract the blasting, and we do not charge extra for access equipment or disposal.
We inspect the loft or roof space with a boroscope camera and moisture meter, identify the foam type, and check for hidden structural damage. You get a fixed price the same day, with photos of what we found.
Our technician uses a dry ice blasting machine at 150 to 200 psi to shatter and lift the foam from rafters, tiles and wall plates. The process is non-abrasive and leaves timber surfaces intact for inspection.
We capture debris at source with an industrial vacuum and run an air scrubber to keep airborne dust down. Doorways are sealed with polythene so your living space stays clean throughout the job.
An oscillating multi-tool and spray foam cutting saw clear the rafter notches and tight corners where blasting cannot reach. We re-check with the moisture meter to confirm no foam pockets remain behind the vapour barrier.
All foam, dust and debris are bagged and removed from site. We dispose of it responsibly and leave the loft clean and ready for new insulation, a surveyor inspection or reinstatement work.
You receive before-and-after photos, a written summary of the work and moisture readings. This is the documentation lenders and surveyors ask for on mortgage-related removals in Grimsby.
We visit your Grimsby property, inspect the loft or roof space with a boroscope camera and moisture meter, and check the foam type. You get a fixed price the same day, with no hidden extras for access, waste or disposal. Most surveys take 30 to 45 minutes.
We lay dust sheets, seal doorways with polythene, and set up the industrial vacuum and air scrubber before any blasting starts. Respirators and protective clothing go on, and we isolate the loft hatch. This keeps dust out of your living space while we work.
Our technician fires dry ice pellets from the blasting machine at 150 to 200 psi, working in sections across the rafters, tiles and wall plates. Foam shatters and falls, and the vacuum captures it at source. A typical Grimsby loft takes four to eight hours of blasting.
Once the bulk foam is off, we switch to an oscillating multi-tool and spray foam cutting saw for the rafter notches and tight corners. We re-check with the moisture meter and boroscope to confirm no foam pockets remain behind the breathable membrane or vapour barrier.
We bag and remove all waste, wipe down surfaces, and leave the loft clean. You get before-and-after photos, a written completion note and advice on ventilation and next steps. Most jobs finish with the same-day dry ice blasting spray foam removal Grimsby customers book.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Fires dry ice pellets at 150 to 200 psi to shatter and lift spray foam from timber, tiles and masonry without heat, water or abrasives.
Captures foam debris and dust at source during blasting, keeping the loft and your living space clean throughout the job.
Filters airborne dust and particles in the work area, which is essential when blasting in occupied homes and commercial premises.
Lets us inspect behind plasterboard, insulation boards and vapour barrier to map hidden foam and check for rot or water damage.
Measures timber and plasterboard moisture before, during and after removal, so we can confirm the roof space is dry before we leave.
Clears foam from rafter notches, tight corners and around services where the blasting machine cannot reach.
Cuts through thick closed cell foam in bulk before blasting, speeding up removal on large roof decks and warehouse panels.
A 1930s semi in Scartho had closed cell foam sprayed across every rafter, blocking ventilation and trapping moisture. The surveyor flagged roof rot and the buyer's lender refused to proceed until the foam was removed and the timbers inspected.
We blasted the foam off in a day and a half, cleared the rafter notches with an oscillating multi-tool and confirmed moisture readings were within normal range. The lender accepted our report and the sale completed two weeks later.
A landlord in Cleethorpes had two rental lofts with open cell foam over the breathable membrane. Tenants reported condensation and rising heating costs, and the insurer had excluded roof-related claims on both properties.
Both lofts were cleared in two days using dry ice blasting and an industrial vacuum. We restored airflow, documented the work with photos and moisture readings, and the landlord reinstated insurance cover within a week.
An Immingham warehouse had spray foam across the roof deck hiding a persistent leak. Water was pooling above the ceiling tiles and the manager could not find the source without stripping the foam.
We worked night shifts with two blasting units and air scrubbers, removing 180sqm of foam in three nights. The leak source was identified and photographed, and the deck was left clear for the roofing contractor to repair.
Spray foam causes more problems than it solves when it is applied to the wrong surface. These are the issues we see most often in Grimsby and across North East Lincolnshire.
Ask a pro →We remove the foam with dry ice blasting, inspect the timbers and provide a written completion report with photos. Most Grimsby lenders accept this as evidence the risk has been dealt with, and the mortgage can proceed.
Dry ice blasting lifts the foam without damaging the timber, so we can see exactly what is going on. We check every rafter with a moisture meter and boroscope, and flag any rot for repair before it spreads.
We assess the cavity with a boroscope camera, remove the foam where accessible, and advise on remedial cavity insulation. Most Grimsby terraces see the damp patches dry out within a few weeks of removal.
Once the foam is gone, we check the membrane and vapour barrier and advise on ventilation. Restoring airflow lets the roof space dry out naturally and helps your insulation perform as intended.
Typical 2026 pricing in Grimsby runs from around 1,200 GBP for a small loft to 3,500 GBP for a full roof space with closed cell foam. The main factors are square metres of foam, access, foam type and whether the roof void needs timber repairs. We give a fixed price after a same-day survey, so you know the total before we start.
Yes. Dry ice blasting is non-abrasive, uses no water or chemicals, and does not damage timber, tiles or plasterboard when done correctly. We use respirators, protective clothing, an air scrubber and an industrial vacuum to control dust. The process is safe for occupied homes, and most lofts are ready to use the same day.
It usually helps. Most lenders refuse mortgages on properties with spray foam because it traps moisture and hides roof rot. Once the foam is removed and documented, surveyors can inspect the roof structure and sign off. We provide a completion summary and photos that your broker can send to the lender.
A standard three-bedroom loft with 50 to 70sqm of foam takes one to two days. Larger roofs, closed cell foam or properties needing timber repairs can run to three days. We confirm the timeline at survey and keep you updated daily. Most Grimsby jobs are finished within the week they are booked.
Spray Foam Removal Near MeIf you are searching for spray foam removal near me in Grimsby, we cover the whole town and surrounding villages. We survey, quote and remove foam in one coordinated visit, so you are not juggling multiple trades.Explore →
Same Day Spray Foam RemovalSmall lofts and single-room foam jobs can often be cleared the same day you call. We keep dry ice blasting machines and vacuum kit on the van for Grimsby and Cleethorpes postcodes, so there is no waiting for equipment.Explore →
24/7 Spray Foam RemovalEmergency call-outs for commercial premises, water ingress after a storm, or a lender deadline that cannot wait. We run a 24/7 phone line on 0147 246 0146 and can mobilise a crew outside normal hours across North East Lincolnshire.Explore →
Residential Spray Foam RemovalMost of our Grimsby work is residential: lofts, roofs, cavity walls and garages. We protect carpets, plasterboard and insulation boards, and we leave the property clean. You get before-and-after photos and a written completion note for your records.Explore →
Commercial Spray Foam RemovalWarehouses, offices and industrial units across Grimsby and Immingham often have spray foam on roof decks and wall panels. We work around your operating hours, use air scrubbers to control dust, and provide RAMS and insurance documents before we start.Explore →
Loft Spray Foam RemovalLoft foam is the most common job we see in Grimsby. Closed cell foam sprayed onto rafters traps moisture and blocks ventilation. We blast it off, inspect the timber with a moisture meter and boroscope, and report on any rot before it spreads.Explore →
Roof Spray Foam RemovalFoam sprayed directly onto roof tiles or breathable membrane is a common cause of failed surveys. Dry ice blasting lifts it without cracking tiles or tearing membrane. We then check the roof structure and advise on ventilation and repairs.Explore →
Attic Spray Foam RemovalAttic and loft conversions often hide foam behind plasterboard and insulation boards. We use a boroscope camera to map the foam, then remove it with dry ice blasting and an oscillating multi-tool for the tight corners.Explore →If a surveyor has flagged spray foam, or you are buying or selling a property in North East Lincolnshire, call Apex Focus Spray Foam on 0147 246 0146. We offer same-day assessments, fixed pricing and a written completion report for your lender. Lines are open 24/7 for emergency and commercial call-outs.
Get a Free Quote 0147 246 0146 →Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email [email protected] with a photo of your loft and we will give you an initial view before we visit.