Specialist extraction for mortgage, damp and roof rot problems

Closed Cell Spray Foam Removal in Grimsby

Closed Cell Spray Foam Removal in Grimsby is the specialist job of stripping rigid polyurethane foam from rafters, lofts and roof decks without wrecking the timber underneath. We handle closed cell spray foam extraction Grimsby homeowners need when a surveyor flags foam, a lender refuses a mortgage, or damp starts tracking through the roof space. If your loft is foamed solid, we can survey it this week and tell you exactly what it will take to clear it.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Closed Cell Spray Foam Removal in Grimsby, North East Lincolnshire
Careful work. Honest options.
About this service

What Closed Cell Spray Foam Removal in Grimsby Involves

Closed Cell Spray Foam Removal in Grimsby is the controlled stripping of rigid, high-density polyurethane foam from roof timbers, rafters and decking. Unlike open cell foam, closed cell sets like hard plastic and bonds to timber, so it has to be cut, chiselled and blasted away rather than pulled off. We use a spray foam cutting saw to slice the bulk out, an oscillating multi-tool for the edges, and dry ice blasting to clear the last millimetre off the wood without gouging it. Every rafter gets checked with a moisture meter and a boroscope camera before we sign the job off.

Most Grimsby foam jobs we see come from one of three triggers: a failed building survey, a mortgage refusal, or damp and condensation that started after the foam went in. Closed cell foam seals a roof so tightly that the breathable membrane underneath can't do its job, and that trapped moisture leads to roof rot and timber decay. If you've been told you need closed cell foam removal North East Lincolnshire-wide, we can usually survey within 24 hours and give you a fixed price before any cutting starts.

  • ✓ Unblocks Your Mortgage
  • ✓ Stops Roof Rot Spreading
  • ✓ Cuts Heating Bills Back
  • ✓ Makes the House Sellable
What's included

What Our Closed Cell Foam Removal Includes

Every closed cell foam removal we carry out in Grimsby includes the full strip-out, timber inspection, clean-up and documentation as standard. There's no separate charge for the survey, the waste removal or the certificate. Add-ons like new insulation, timber treatment or scaffolding are quoted separately only if your job actually needs them.

✓

Free Loft Survey

A technician inspects your loft with a boroscope camera and moisture meter, identifies the foam type and coverage, and photographs everything. You get a fixed written price the same day with no obligation to book.

✓

Full Foam Extraction

We cut, chisel and dry ice blast every trace of closed cell foam off rafters, trusses and roof decks. Bulk removal with a spray foam cutting saw, detail work with an oscillating multi-tool, and final cleaning with dry ice blasting.

✓

Timber Condition Report

Once the foam is off, we check every rafter for rot, damp and hidden structural damage. You receive photos, moisture readings and a plain-English summary you can hand to a surveyor, lender or solicitor.

✓

Contained, Dust-Free Working

The loft hatch is sealed, an air scrubber and industrial vacuum run throughout, and our team wears full protective clothing and respirators. Your carpets, furniture and family life stay out of the way of the work.

✓

Waste Removal and Clean-Up

All foam waste is bagged, carried out through the hatch and disposed of properly. We vacuum and sweep the loft before we leave, so the space is ready for new insulation or a surveyor's inspection the next day.

✓

Removal Certificate and Warranty

You get a signed removal certificate with before-and-after photos, moisture readings and a 5-year workmanship warranty. It's the document Grimsby lenders and solicitors ask for when a mortgage has been held up by spray foam.

How it works

How Our Removal Process Works

01

Survey and Quote

We attend your Grimsby property, inspect the loft with a boroscope camera and moisture meter, and photograph the foam coverage. You get a fixed written price the same day, usually within two hours of the visit. No charge for the survey, no obligation, and no pressure to book on the spot.

02

Containment Set-Up

On day one we lay dust sheets, seal the loft hatch, and set up an air scrubber and industrial vacuum to keep foam dust out of your living space. Our technicians wear full protective clothing and respirators. Set-up takes around 45 minutes on a typical semi-detached Grimsby house.

03

Foam Extraction

We cut the bulk of the closed cell foam away with a spray foam cutting saw, then work the edges and rafter faces with an oscillating multi-tool. Dry ice blasting removes the final bonded layer without damaging the timber. A standard three-bedroom loft takes one to two days to clear completely.

04

Timber Inspection

With the foam gone we check every rafter and the roof deck for rot, damp and hidden structural damage. Anything suspect gets logged with photos and moisture readings. If the timber is sound, we move straight to reinstatement; if it isn't, you get a clear report before we do anything else.

05

Clean-Up and Handover

We vacuum the loft, wipe down surfaces, remove all waste through the hatch, and leave the space swept. You get a removal certificate, before-and-after photos, moisture readings and a 5-year workmanship warranty. Most customers say the loft looks cleaner than before we arrived.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Spray foam cutting saw

Cuts the bulk of rigid closed cell foam off rafters and trusses in straight, controlled passes. It's faster and cleaner than chiselling and leaves the timber face intact for inspection.

Oscillating multi-tool

Gets into the corners, rafter edges and tight roof voids where a saw can't reach. We use it to trim foam back flush with the timber before the final blasting stage.

Dry ice blasting machine

Removes the last bonded layer of foam without gouging or scratching the wood. Dry ice is non-abrasive, chemical-free and leaves no secondary waste beyond the foam itself.

Industrial vacuum and air scrubber

Run throughout the job to capture foam dust and keep it out of your living space. The scrubber cycles loft air through HEPA filters, so the rest of the house stays clean.

Boroscope camera and moisture meter

Used at survey and again after removal to check hidden voids and measure timber moisture content. The readings go into your removal certificate as evidence for lenders and surveyors.

Respirator and protective clothing

Full PPE for every technician on site, including RPE, coveralls, gloves and eye protection. Foam dust and old insulation fibres are not something we take chances with.

Sand blasting equipment

For foam bonded to brick, stone or concrete surfaces in warehouses, garages and outbuildings, where cutting tools alone can't get the residue back to a clean substrate.

Real results

Before and after.

Scartho Semi Loft Cleared

Before

A 1960s semi in Scartho had closed cell foam sprayed across every rafter, blocking the breathable membrane. The buyer's surveyor flagged it, the mortgage was refused, and the loft smelled damp. Moisture readings on the rafters were 24 to 28 percent.

After

We cleared 38 square metres of foam in two days using a cutting saw, multi-tool and dry ice blasting. Rafter moisture dropped to 14 to 16 percent within a week. The removal certificate went to the lender, and the sale completed three weeks later.

East Marsh Terrace Damp Fixed

Before

A Victorian terrace in East Marsh had foam injected into the loft and cavity, and the tenant reported damp patches on the upstairs ceiling. The landlord had been quoted for a full re-roof by another firm and was close to accepting.

After

We removed the closed cell foam from the rafters and cleared the cavity bridging in one day. The damp patches dried out within a fortnight, and the re-roof quote was cancelled. The landlord saved roughly £9,000 against the original quote.

Waltham New-Build Mortgage Unblocked

Before

A 2015 new-build in Waltham had foam sprayed directly onto the roof decking by a previous owner. The lender refused a remortgage, and the owner had six weeks before their fixed rate ended. Foam coverage was 42 square metres.

After

We surveyed on a Monday, started Tuesday, and finished Thursday. All foam was removed, the decking was photographed and moisture-mapped, and the certificate reached the lender on Friday. The remortgage completed inside the original deadline.

Problems we solve

Problems Closed Cell Foam Removal Solves in Grimsby

Rigid foam in a Grimsby roof space causes a predictable set of problems, and they get worse the longer the foam stays put. Here are the ones we're called out for most, and what we do about each.

Ask a pro →
01

Mortgage refused because of spray foam

We remove the closed cell foam, document the cleared timbers with photos and moisture readings, and issue a certificate your lender and solicitor can accept. Most Grimsby sales we unblock complete within three to four weeks of removal.

↗
02

Roof rot and timber decay behind the foam

We strip the foam, inspect every rafter with a moisture meter and boroscope camera, treat any early decay, and restore ventilation so the roof dries out. Catching it early saves thousands compared with a full roof repair.

↗
03

Damp and condensation in the loft

Removing the foam lets the roof breathe again. We clear the deck, check the breathable membrane, and reinstate mineral wool or Thermafleece insulation so the loft stays dry and warm without sealing moisture in.

↗
04

Voided building insurance

We provide a documented removal certificate and photographic evidence that the foam is gone and the roof is sound. You can forward it to your insurer to reinstate cover, and we'll answer any questions their surveyor raises.

↗
Proof you can check

Accredited, Insured and Documented

✓
CHAS AccreditationCHAS (Contractors Health and Safety Assessment Scheme)
✓
ConstructionlineConstructionline
✓
SafeContractorAlcumus SafeContractor
✓
NVQ in Insulation RemovalCity & Guilds
✓
CITB CertificationConstruction Industry Training Board
Good questions

Frequently Asked Questions

0147 246 0146 →

Typical 2026 pricing in Grimsby runs £1,800 to £4,500 for a standard three-bedroom semi loft, depending on foam thickness, access and how much timber needs treating. Larger detached properties, warehouse roofs and jobs needing scaffolding sit higher. We quote fixed prices after a free survey, so you know the full cost before any cutting starts.

Yes. We cover the whole of North East Lincolnshire, including Grimsby, Cleethorpes, Immingham, Healing, Waltham and the surrounding villages. Closed cell foam is harder than open cell and needs cutting and blasting rather than pulling, but we remove it from rafters, roof decks and cavity walls without damaging the timber underneath.

Removal usually fixes the mortgage problem rather than causing one. Most lenders refuse loans because the foam is present, not because it's been taken out. Once we've cleared the foam and issued our removal certificate with photos and moisture readings, surveyors can confirm the roof is sound and your lender can proceed with the valuation.

A standard three-bedroom semi loft takes one to two working days from containment to clean-up. Larger detached homes, multiple roof sections or heavy timber treatment can run to three or four days. We give you a day-by-day schedule at quote stage, and we don't leave a job half-finished overnight without sealing the loft space.

Ready when you are

Book Closed Cell Spray Foam Removal in Grimsby

We're CHAS accredited, fully insured and we've been clearing spray foam since 2022. Free survey, fixed price, 5-year workmanship warranty. Call 0147 246 0146 and we'll book your Grimsby loft survey, often the same day.

Get Free Survey 0147 246 0146 →
Request an appointment

Talk to our Grimsby team

Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email [email protected] with a photo of your loft and we will give you an initial view before we visit.

Call anytime0147 246 0146Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call0147 246 0146